DESCRIPTION: xprobe2 is a far off dynamic working framework fingerprinting apparatus. Xprobe2 depends on fluffy mark coordinating, probabilistic speculations, numerous matches at the same time, and a mark information base. Use: xprobe2 [ – v ] [ – r ] [ – p proto:portnum:state ] [ – c configfile ] [ – o logfile ] [ – p port ] [ – t receive_timeout ] [ – m numberofmatches ] [ – D modnum ] [ – F ] [ – X ] [ – B ] [ – A ] [ – T port spec ] [ – U port spec ] have
EXAMPLE: xprobe2 – v – D 1 – D 2 192.168.1.10 (Will dispatch an OS fingerprinting endeavor focusing on 192.168.1.10. Modules 1 and 2, which are reachability tests, will be incapacitated, so tests will be sent regardless of whether target is down. Yield will be verbose.)
EXAMPLE: xprobe2 – v – D 1 – D 2 192.168.1.10 (Will dispatch an OS unique mark endeavor focusing on 192.168.1.20. The UDP objective port is set to 53, and the yield will be verbose.)
EXAMPLE: xprobe2 – v – D 1 – D 2 192.168.1.10 (Will just empower TCP handshake module (number 11) to test the objective, extremely helpful when all ICMP traffic is separated.)
EXAMPLE: xprobe2 – v – D 1 – D 2 192.168.1.10 (Will cause TCP handshake module to attempt indiscriminately figure open port on the objective by successively sending TCP parcels to the most probable open ports (80, 443, 23, 21, 25, 22, 139, 445 and 6000).)
EXAMPLE: xprobe2 – v – D 1 – D 2 192.168.1.10 (Will empower portscanning module, which will check TCP ports beginning from 1 to 1024 on 127.0.0.1)
EXAMPLE: xprobe2 – v – D 1 – D 2 192.168.1.10 (If remote objective has TCP port 139 open, the order line above will empower application level SMB module (assuming remote objective has TCP port 445 open, substitute 139 in the order line with 445).)
EXAMPLE: xprobe2 – v – D 1 – D 2 192.168.1.10 (Will empower SNMPv2c application level module, which will attempt to recover sysDescr.0 OID utilizing local area strings taken from xprobe2.conf document.)